Troubleshooting Tips
Problem
Possible Causes
What To Do
Wash items are not fully
dry
Unloading dishwasher too soon.
The drying cycle must be complete
before the dishwasher is unloaded.
Check the Display for end time.
Insufficient Rinse Aid.
Check for Low Rinse Aid Level
warning and re fill if necessary.
Rinse Aid setting too low.
Increase Rinse Aid setting.
Glassware developing
cloudy stains and calcium
rings
Insufficient Rinse Aid being
dispensed.
Adjust the Rinse Aid Dispenser as
per the instructions
Wash items showing signs
of rust
Items are unsuitable for
dishwasher use.
Discontinue washing such items in
the dishwasher.
Tub becoming dull in color Tub requires rejuvenation.
Dose the tub with specific Stainless
Steel Tub /Bowl Cleaner.
Traces of detergent in the
tub
Incomplete/interrupted wash cycle.
Rerun wash program to ensure
wash load is not contaminated with
detergent.
Foam in the wash tub
Non electric dishwasher detergent
used.
Use correct detergent.
Spilt Rinse Aid present.
Repeat the Rinse Program until
clear.
Error Codes
If there is a malfunction, the dishwasher will display error codes to identify the symptom.
Codes
Meanings
Possible Causes
E1
Extended Water Inlet Time.
Water supply failure, closed faucet,
or insufficient supply water
pressure.
E3
Water temperature not reaching
target.
Heating element malfunction.
E4
Leak Detected.
For some reason water has leaked
from the wash system. Possibilities
are over height item in the wash
load stopping lid from sealing;
internal plumbing or seal failure.
Ec
Washing Control System failure.
Electronics or Motor failure.
Ed
Failure of connection between
Display Unit and the Control
System.
Wiring failure between the two
devices.
EH
The cover does not open or close
properly.
The cover motor device damage or
foreign matter stuck.
Product Specification
35