2
Installation
UNPACKING THE APPLIANCE
Remove the external & internal packaging.
When unpacking the appliance please check for any damage. If damage is found, do not connect to the power
source and contact the Authorised Service Provider.
Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This will reduce
the possibility of a malfunction in the cooling system from handling during transportation. Remove any protective
film from the outer surface.
Clean the interior surface with lukewarm water using a soft cloth.
Appliances Overview
Left: (RHCF100)
1-Recessed Handle
2-Basket
3-Thermostat Control Panel
4-Drain hole
Right:(RHCF200&RHCF260)
1-Handle
2-Drain hole
3-Basket
4-Thermostat Control Panel
Summary of Contents for RHCF100
Page 7: ...Troubleshooting ...
