Warning and safety information
Installing the built in oven
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Do not leave this oven unattended or unsupervised whilst children or infirmed are present.
During use the appliance will become hot, care should be taken to avoid touching heating elements inside the
oven.
Accessible parts may become hot during use, to avoid burns young children should be kept away.
The installation of this oven is to be carried out by using only a qualified electrician and must be earthed.
This oven is to be installed in accordance with the local, national building, electrical and plumbing codes.
If the power supply cable is damaged, it must be replaced by the manufacturer or its service agent or similarly
qualified person to avoid a hazard
The oven is not intended to be operated by means of an external timer or separate remote-control system.
Do not allow electrical fittings or cables to be in contact with hot areas of the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven glass doors since they can
scratch the surface, which may result in shattering of the glass
Do not clean the oven with an steam cleaner
.
Important: the power supply to the appliance must be turned off before any adjustments or maintenance work.
Installation of Built-in Oven
To ensure the proper working order of the built-in appliance, the kitchen unit must be of a suitable size.
To provide adequate ventilation, there must be appropriate ventilation openings in the front bottom and the top part of
200 cm
2,
and an exhaust opening on the bottom of a least 200 cm
2
, and an exhaust opening of at least 60 cm
2
.
The unit panels next to the cooker must be heat resistant. In the case of veneered wood units, glues must be resistant
to a temperature of 100
℃
.
In accordance with safety standards, once the appliance has been mounted, there must be no possible contact with
electrical parts. Any protective parts must be secured so that they can only be removed with the use of tools.
2