Installation -
continued
IMPORTANT:
Do not use a silicon sealant to seal the
appliance against the surface.
Carefully place the cooktop into the hole that you have cut out.
There are holes on the base or the sides of the hob that you can fix the four
brackets to. There are three holes in each one of the brackets.
You should place the bracket on the underneath of the hob, in a position that is
appropriate for the aperture that you have cut out. Using the screws provided,
fix the bracket to the hob. These screws MUST be securely tightened.
screw
bracket
screw hole
worktop
bracket
screw
hob top
