Robin Robin MMX Spot, User Manual

Page: 22 / 49

Base Temperature - The menu shows temperature in the fixture base (on the display PCB).
Current - A current temperature in the fixture base.
Maximum NonRes.
- A maximum temperature in the fixture base since the fixture has
been fabricated.
Maximum Res.
- A maximum temperature in the fixture base since the counter
was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
Ambient Temperature
- The menu shows temperature of the induced air on the fan in the fixture base .
Current
- A current temperature of the induced air in the fixture base.
Maximum NonRes. - A maximum temperature of the induced air in the fixture base since
the fixture has been fabricated.
Maximum Res. - A maximum temperature of the induced air in the fixture base since
since the counter was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
Lamp Driver Temperature Level - The menu shows the temperature of the lamp driver in the base.
Current - A current temperature level of of the lamp driver.
Maximum NonRes. - A maximum temperature level of the of the lamp driver since
the fixture has been fabricated.
Maximum Res.
- A maximum temperature level of the of the lamp driver
since the counter was last reset.
In order to reset this counter to 0, touch the text box next to the item "Maximum Res."
DMX Values -
The menu is used to read DMX values of each channel received by the fixture.
Wireless State - The menu serves for reading of the wireless operation status (only for Wireless DMX ver-
sion).
Unlink Wireless Adapter - The menu serves for unlinking the fixture from the transmitter (only Wireless
DMX version)
Software Version - Select this item to read the software version of the fixture modules:
Display System - A display processor on the display board in the fixture base
Module M - A pan/Tilt processor on the board in the fixture arm.
Module G
- A rot. gobo wheels processor on the board in the fixture head.
Module S
- A strobe/colour/hot-spot processor on the board in the fixture arm
Module I
- A dual graphic wheel /iris processor on the board in the fixture head.
Module O
- A focus/zoom/prism/frost/ processor on the board in the fixture head.
Module C
- CMY+CTO processor on the board in the fixture head.
Product IDs -
The menu is used to read the MAC Address ,RDM UID and RDM Label.
View Logs - Use this menu to read fixture´s data which have been recorded during fixture operation. This
colected data allows easier troubleshooting.
Fixture Errors - Use this menu to read fixture errors which have occured during fixture operation.
There is a list of error folders:
Pan Errors Prism Errors
Tilt Errors Prism Rotation Errors
Dimmer Errors Frost Errors
Dimmer Errors Cyan Errors
Colour Errors Magenta Errors
HotSpot Errors Yellow Errors
Gobo Errors CTO Errors
Gobo Carousel Errors Clean Air Filters
Static Gobo Errors Lamp is Too Hot
Iris Errors Overheated
Focus Errors Active Lamp Timer
Zoom Errors Lamp Errors
Base Overheated Temp. Sensor Errors
Fixture States - Recorded following actions: Fixture On, Fixture Off, Lamp On, Lamp Off.