– 49 –
(4) Wind the spiral spring.
-1 Holding the case, turn the reel five turns in
counter-clockwise.
-2 Fix the reel in the position that the rope hole of
reel aligns with the rope guide.
(5) Inserting the rope. (this should be done by two people)
-1 Thread the rope end through the rope guide and
the rope hole of the reel, and pull 20cm out from
the reel.
-2 Tight the end of the rope.
-3 Fix the rope end to the reel.
-4 Hold the rope at the distance 50cm from the rope
guide. Hold securely.
-5 Gently release the reel and have it wind the rope
on the reel until the knot reaches the rope guide.
Five turns in counter-clockwise
About 20cm
About 10mm
Caution:
Do not release the pressure to hold the reel
while winding the spiral spring.
The spring force is strong and cause sudden
rewinding if you release the pressure.
Assembly is completed.
※
These are the disassembly and assembly procedures, please be sure to review the following item checklist to
insure that the parts securely installed.
