5
DMX
0 - 9
0 - 3
3 - 63
64 - 95
96 - 7
- 59
60 - 9
9 - 3
4 - 55
Pan/Tilt Macro
Disabled pan/tilt macro
Reserved
Figure of circle (from small to large)
Figure of horizontal eight (from small to large)
Figure of vertical eight (from small to large)
Figure of rectangle (from small to large)
Figure of triangle (from small to large)
Figure of star (from small to large)
Figure of cross (from small to large)
0
- 7
- 9
30 - 55
Pan/Tilt Macro Speed
No macro generation
Macro generation from fast to slow-forwards
No macro generation
Macro generation from slow to fast-backwards
7.6 Tab "Service"
Adjust DMX Values
- The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Calibrations
- This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects
- The menu allows the fine adjustment of effects.
Pan
- a pan position fine adjustment
Tilt
- a tilt position fine adjustment
Effect Wheel
- an effect wheel position fine adjustment
Rot. Gobo Wheel
- a carousel of rotating gobos fine rotation
R. Gobo Index
- a fine indexing of rotating gobo
Prism
- a prism module fine adjustment
Iris
- an iris module fine adjustment
Zoom
- a zoom module fine adjustment
Focus
- a focus module fine adjustment
Fr. Shutt.rot
- a framing shutters modele fine rotation
Fr. Shutter I M1
- a framing lamella 1 fine movement
Fr. Shutter I M2
- a framing lamella 1 fine swivelling
Fr. Shutter 2 M1
- a framing lamella 2 fine movement
Fr. Shutter 2 M2
- a framing lamella 2 fine swivelling
Fr. Shutter 3 M1
- a framing lamella 3 fine movement
Fr. Shutter 3 M2
- a framing lamella 3 fine swivelling
Fr. Shutter 4 M1
- a framing lamella 4 fine movement
Fr. Shutter 4 M2
- a framing lamella 4 fine swivelling
Calibration of the effects via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find "Pan" and touch it to enter the fine effect adjustment screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for next item
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibrate Colours
- The menu serves for adjusting of LEDs saturation to achieve colour temperature
of 5600K for white output.
Red
- a red LEDs saturation fine adjustment
Green
- a green LEDs saturation fine adjusment
Blue
- a blue LEDs saturation fine adjustment
White
- a white LEDs saturation fine adjustment
Calibration of the white colours via DMX controller
1. Connect DMX controller to the fixture , open shutter and dimmer, set zoom at 128 DMX ,focus image and set
the "Virtual Colour Wheel" channel at 8000K. Aim the light beam on the lux meter (e.g. Minolta CL-200 Chroma