ROBIN WOOD SMARTFIREModule, Manual

Page: 32 / 122

EN
6
INSTALLATION
1. Connect the SMARTFIREModule to the power supply: the LED (a) must be on and not
flashing;
2. Connect the SMARTFIREModule to the ROBIN WOOD board using the cable
supplied in the kit: the LED (b) must be on and not flashing, in case of flashing there
may be problems communicating with the control board, make sure that the heating
system is connected to the mains power supply;
3. Wi-Fi communication: with LED (c) solid the connection with the APP SMART FIRE has
been successful and the device is communicating correctly;
4. Hardware reset button (d): press in case of persistent product malfunction.
If the device is offline during normal operation, press the button for 3 seconds.
During configuration and operation, the LED can change from solid to flashing light.
Power
flashing error
solid OK
COM
flashing not communicating with the control board
solid Communication present
Wi-Fi
flashing Wi-Fi is not configured
solid Wi-Fi connected
POWER/Wi-Fi flashing Configuration phase