background image

FEDERAL EMISSION COMPONENT DEFECT WARRANTY

EMISSION COMPONENT DEFECT WARRANTY COVERAGE

This emission warranty is applicable in all States, except the State of California.

Fuji Heavy Industries Ltd. and Robin America Inc., Wood Dale Illinois, (herein "ROBIN AMERICA")
warrant to the initial retail purchaser and each subsequent owner, that this utility equipment engine
(herein "engine") was designed, built, and equipped to conform at the time of initial sale to all applic-
able regulations of the U.S. Environmental Protection Agency (EPA), and that the engine is free of
defects in materials and workmanship which would cause this engine to fall to conform with EPA
regulations during its warranty period.

For the components listed under PARTS COVERED, the dealer or service center authorized by
ROBIN AMERICA will, at no cost to you, make the necessary diagnosis, repair, or replacement
necessary to ensure that the engine complies with applicable U.S. EPA regulations.

EMISSISON COMPONENT DEFECT WARRANTY PERIOD

The warranty period for this engine begins on the date of sale to the initial purchaser and continues
for a period of 2 years.

PARTS COVERED

Listed below are the parts covered by the Emission Component Defect Warranty. Some of the parts
listed below may require scheduled maintenance and are warranted up to the first scheduled
replacement point for that part.

(1) Fuel Metering System

(i) Carburetor and internal parts

(ii) Fuel filter, if applicable

(iii) Throttle stopper, if applicable

(iv) Choke System, if applicable

(2) Air Induction System

(i) Air cleaner plate

(ii) Air cleaner case

(iii) Air cleaner element

(3) Ignition System

(i) Spark plug

(ii) Flywheel Magneto

(iii) Ignition Coil

(4) Miscellaneous Items Used in Above Systems

(i) Fuel hoses, clamps and sealing gaskets

OBTAINING WARRANTY SERVICE

To obtain warranty service, take your engine to the nearest authorized ROBIN AMERICA, distributor
or dealer. 
Bring your sales receipts indicating date of purchase for this engine. The dealer or service center
authorized by ROBIN AMERICA will perform the necessary repairs or adjustments within a reason-
able amount of time and furnish you with a copy of the repair order. All parts and accessories
replaced under this warranty become the property of ROBIN AMERICA.

WHAT IS NOT COVERED

*Conditions resulting from tampering, misuse, improper adjustment (unless they were made by the

dealer or service center authorized by ROBIN AMERICA during a warranty repair), alteration, acci-
dent, failure to use the recommended fuel and oil, or not performing required maintenance services.

*The replacement parts used for required maintenance services.

EH025/035取説̲米国向EU1717  02.5.15  11:39 AM  ページ03

Summary of Contents for EHO25A
































Reviews: