Installation Guide
Gate Swinging Out
PATENT PENDING
Sandall Stones Road, Kirk
Sandall Industrial Estate, Kirk
Sandall, Doncaster, DN3 1QR
Tel: +44 (0) 1302 790790
Fax: +44 (0) 1302 790088
Web: www.polypipe.com
9,5 mm
3,5 mm
wood bit
#2
Phillips screwdriver
Tape measure
Latch assembly
Latch cover
Yardlock
Screws
A
B
C
E
F
(12x)
G
(1x)
Required tools
Parts in the box
Insert latch arm into latch and position on gate.
If you have an out-swinging gate, it is recommended that you reverse your hinges to create an in-swinging gate for added security.
The following instructions are for
OUT-SWINGING
gates. Instructions for
IN-SWINGING
gates are available at www.yardlock.ca.
latch arm
gate
post
latch
INTERIOR
Secure latch assembly with supplied screws.
508 mm
minimum
89 mm
minimum
B
F
(6x)
A
3,5 mm
Pilot holes (6x)
top of gate
A
B
1 / 4
Install latch assembly on gate interior
1
Recommendations