(2) Alarm 3 and alarm 4
5
- Alarm 3 and alarm 4 are weekday alarms.
- As illustrated in the diagram, alarm 3 will sound at 7:30 AM of dual time (T2) from Monday to Friday.
- The setting sequence is shown as follow:
(3) Alarm 5 and alarm 6
- Alarm 5 and alarm 6 are date alarms.
- As illustrated in the diagram, alarm 5 will sound at 8:30 PM of normal time (T1) on the 25th of December.
- The setting sequence is shown as follow:
- After all adjustments are completed, press S4 to exit the setting mode.
- Press S1 to toggle the alarm and chime function on or off.
Remarks:
1. There are 6 alarms that work independently. Alarm 1 and alarm 2 are daily alarms, alarm 3 and alarm 4 are
weekday alarms, alarm 5 and alarm 6 are date alarms. If month and day of alarm 5 or alarm 6 are set to “--”,
the alarm will act as daily alarm.
2. The alarm sounds for 20 seconds at alarm time if the alarm function is “on”. Press any button to stop the
alarm sound.
3. If the chime function is “on”, the chime icon will be displayed, the watch will give out a “Beep, Beep” sound
at every full hour and there will be button confirmation sound.
4. The alarm function is automatically set to “on” when exiting setting mode.
5. The alarm icon is displayed at the time mode (T1 or T2) that the alarm is set to refer to.
6. If 24-hour display format is selected for time mode, there will be no AM flag “A” or PM flag “P” for alarm time.
7. If there is no button operation for about 2 minutes in setting mode, the watch will return back to Alarm mode
automatically.
8. If S5 is pressed in Alarm mode, Time mode will be shown for 3 seconds and then return to the previous
display automatically.
9. To exit Alarm mode, press S3 will enter mode selection display.
(H) HOW TO USE CHRONOGRAPH
S1
S2
S3
S4
S5
CHIME “ON”
S3
S3
S3
T1/T2
DAY
MONTH
MINUTE
S3
S3
S3
T1/T2
ENDING WEEKDAY
STARTING WEEKDAY
MINUTE
S3
S3
HOUR
S3
HOUR
S3
CHIME ICON
- At mode selection display, press S2 to enter Chronograph mode, mode prompt “CHRON” will be displayed for
2 seconds first.