13
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press
the
On/Off
button to switch on your radio.
The display will show ‘
Welcome To Digital Radio
’.
3. If this is the
fi
rst time the radio is used a scan of
the Band III DAB channels will be carried out.
If the radio has been used before the last used
station will be selected.
4. During the scanning process, the lower line of the
display shows a bar-graph indicating progress
of the scan.
5. When the scanning is completed the
fi
rst station
(in numeric-alpha order 0...9...A....Z) will be
selected. Your radio will automatically set to the
current time.
6. If the station list is still empty after the scan your
radio will display ‘Signal n/a’.
7. If no signals are found it may be necessary to
relocate your radio to a position giving better
reception. Then, either switch your radio off
and on again, or follow the procedure page 23
to repeat the scan.
