This product is guaranteed for twenty four months from the date
of purchase by the original owner against failure due to faulty
workmanship or component breakdown, subject to the procedure
stated below. Should any component or part fail during this
guarantee period it will be repaired or replaced free of charge.
The guarantee does not cover: 1. Damage resulting from incorrect
use. 2. Consequential damage. 3.Product with removed or defaced
serial numbers. N.B. Damaged or broken aerials will not be
replaced under guarantee.
Procedure: Any claim under this guarantee should be made
through the dealer from whom the product was purchased. It is
likely that your Roberts dealer will be able to attend to any defect
quickly and efficiently, but should it be necessary the dealer
will return the product to the company’s service department
for attention. In the event that it is not possible to return the
product to the Roberts dealer from whom it was purchased,
please contact Roberts Radio using the contact details on the
www.robertsradio.com website.
For product repairs falling outside the guarantee period, please refer
to the “customer care” tab on the www.robertsradio.com website.
These statements do not affect the statutory rights of a consumer.
Designed & Engineered in the UK
Made in China
Warranty
ROBERTS RADIO LIMITED
www.robertsradio.com
© 2021 Roberts Radio Limited
Issue 5a 2021-03-15
Battery powered stereo FM / MW radio
Please read this guide and the safety/
warranty leaflet before use
Sports 995
The company reserves the right to amend the
specification without notice.
Other information
STEP 2 - Operating your radio cont.
Presetting stations
Mono / Stereo mode - FM
Deep Bass Boost button
Auto power off
Tuning step size - FM and AM
Reset the radio
Safety
Specifications
There are 5 memory presets for each waveband FM1, FM2 and MW (AM).
1
Press and release the
Power / Band
button to switch on your radio.
2
Tune to the required station.
3 Press and hold down the required
Memory Preset
button (1-5) until a beep is heard (via
earphones). The preset number will momentarily flash in the display and the station will be
stored under the chosen preset button. Repeat this procedure for the remaining presets.
4
Stations stored in preset memories may be overwritten by following the above procedure.
Recalling preset stations
1 Press and release the
Power / Band
button to switch on your radio. To select the required
waveband repeatedly press the
Band
button.
2
Press and release the required
Memory Preset
button. Your radio will tune to the chosen preset
station stored in the preset memory.
ST
ST
Your radio will play stereo FM broadcasts in stereo provided that the received signal is of adequate
strength. However, as a stereo signal becomes weaker the audio signal will become poorer. It may be
preferable to force the radio to play the station in mono in order to reduce the level of background hiss.
1 To reduce the hiss press and release the
Mono / Stereo
button until the stereo indicator is
removed from the display. To return to stereo mode press and release the
Mono / Stereo
button
until the stereo indicator shows on the display.
SET
SET
1 Press the
Deep bass boost
button to enhance bass sounds. The display will show ‘DBB’.
Press the
Deep bass boost
button again to return to normal sound.
1
In order to save battery power, your radio is designed to automatically switch off after 90 minutes
of use.
2
For continuous listening, first switch off your radio (press and hold the
Power / Band
button until
OFF is displayed). Then press and hold the
Power / Band
button so that the radio switches
on, and keep the button held until the auto shut off indicator disappears from the display.
3
To use the auto shut off feature again, switch off the radio and press and release the
Power /
Band
button.
The majority of FM radio stations use frequencies which are multiples of 100kHz. To change
the FM tuning step size between 50kHz and 100kHz please follow the steps below. In Europe
and many parts of the world MW (AM) tuning steps are 9kHz. In north and south America the
MW tuning step size is 10kHz. To change the AM tuning step size between 9kHz and 10kHz
please follow the steps below.
1 The radio should be switched off with the time displayed.
2 Press and hold the
DBB/Step
button and keep it pressed.
3 With the button still pressed the radio will display the software version number for a
couple of seconds. The radio will then start to flash the currently selected FM step size
on the display (50 or 100).
4 Release the
DBB/Step
button.
5 To change the FM step size press and release the
Tuning Up
or
Down
button as needed.
6 To save the setting, press and release the
DBB/Step
button. The radio will then start to
flash the currently selected AM step size on the display (9 or 10).
7 To change the AM step size press and release the
Tuning Up
or
Down
button as needed.
8 To save the setting, press and release the
DBB/Step
button.
9 If the
DBB/Step
button is not pressed within 10 seconds of the previous operation then
the radio will revert to the time display and the last setting change will not be saved.
If your radio fails to operate correctly or some digits on the
display are missing or incomplete, you may reset the product
as described below to resume normal operation.
1 Make sure your radio is switched off. (Press
and hold the
Power / Band
button until
OFF is displayed.)
2 Press and hold the
Mono/Stereo
button.
Keeping the
Mono/Stereo
button pressed,
press and hold the
Power / Band
button
within one second.
3
With both buttons still pressed, the radio display will briefly
flash ‘dEF’ and will then show all icons. After a couple of
seconds the display will revert to showing the clock display
of 12:00. The buttons should then be released.
4 All configuration settings will be restored to their defaults,
preset stations will be erased and the clock will be reset.
5 In the event that you are unable to switch off the radio or
apply the reset procedure above, we suggest removing
both batteries from the unit for at least one hour before
reinserting them. Then please try the reset procedure
above (steps 1-3).
Batteries
2 x LR03 (AAA size)
Battery Life
Approx. 30 hrs using alkaline batteries
Frequency coverage
FM 87.5 - 108MHz
AM 522 - 1710kHz (9kHz)
AM 520 - 1710kHz (10kHz)
Earphone Jack
3.5mm dia (Stereo)
•
Your radio should not be exposed to liquids, steam, sand,
dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the radio.
•
It is recommended to operate the product such that there
is a minimum distance (10cm recommended) to adjacent
objects in order to ensure good ventilation.
•
The ventilation of the product should not be restricted by
covering it or its ventilation openings with items such as
newspapers, tablecloths, curtains etc.
•
No naked flame sources such as lighted candles should be
placed on the product.
•
There are no user serviceable parts inside this product. Do
not attempt to disassemble any part of the product.
•
It is recommended to avoid using or storing the product at
extremes of temperature. Avoid leaving the unit in cars, on
window sills, in direct sunlight etc.
•
The product must be used in a moderate climate.
•
Operating temperature range +5°C to +40°C.
•
Name plate is located on the rear of your radio.
