20
2
3
4-6
1
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press
the
On/Off
button to switch on your radio.
2. If needed, press and release the
DAB/FM
button until the FM mode
is selected.
3. Press and hold the
Info
button until the Advanced FM menu shows
on the display and then release the button.
4. Rotate
the
Tuning
control
until
' FM Scan Zone'
shows on the display.
Press and release the
Tuning
control.
5. Rotate
the
Tuning
control to switch between Local and Distant options
on the lower line of the display. The current setting will be marked
with an asterisk. The Distant option will allow the radio to
fi
nd weaker
signals when scanning.
6. Press and release the
Tuning
control to con
fi
rm your selection. The
radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
FM Scan Zone
FM
Local
FM Scan Zone *
Distant
FM Scan Zone
