Roberts RD4, Operating Instructions Manual

Page: 8 / 48

8
Batteries
1. Open the battery cover located on the rear of the your radio by
sliding it in the direction shown by the arrow.
2. Insert 3 x AA size batteries into the compartment. Make sure the
(+) and (-) ends of the batteries are positioned as shown inside
the compartment.
3. Close the battery cover
4. Batteries should be replaced when the the Battery
Level icon shows low.
5. Press the Power button to switch the radio off before replacing
batteries.
6. Press the Power button to switch the radio on after batteries
have been replaced.
7. If the radio is not be used for an extended period of time it is
recommended that the batteries are removed from the radio.
8. The radio retains all settings. Battery replacement does not cause
a Reset.
9. When the power is too low for the radio to operate, the icon will
flash and the unit will shut down automatically.