17
Presetting stations
There are 5 memory presets for each waveband FM1, FM2 and MW.
1. Switch on your radio by pressing the
Power button
.
2. Tune to the required station using one of the methods previously
described.
3. Press and hold down the required
Memory Preset button
until a
beep is heard (via earphones) and the preset number appears in
the display and the station will be stored under the chosen preset
button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories may be overwritten by following
the above procedure.
Recalling preset stations
There are 5 memory presets for each waveband.
1. Switch on your radio by pressing the
Power button
.
2. Select the required waveband by repeatedly pressing the
Band
button.
3. Momentarily press the required
Memory Preset button
, the preset
number and station frequency will appear in the display.
Summary of Contents for R9995
Page 1: ...R9995 FM Stereo AM PLL Digital Radio ROBERTS Please read this manual before use...
Page 4: ...3 Controls 7 7 Volume control 8 Power button 10 9 9 Lock switch 10 Battery compartment 8...
Page 6: ...5 Earphones 13 Earphones...
Page 13: ...If you need any further advice please call our Technical Helpline on 020 8758 0338 Mon Fri 12...