Operating your radio - search tuning
1.
Switch on your radio by pressing the
Power button.
2.
Set the
Waveband switch
to the required waveband. The waveband
selected will appear in the display. On FM fully extend the
Telescopic
aerial
. On MW and LW rotate your radio for best reception.
3.
Press and hold down either the
or - buttons
until the
frequency in the display begins to change rapidly. Release the button.
4.
Your radio will scan the selected waveband, stopping each time it finds
a station of sufficient strength. Adust the
Volume control
to the
required level.
5.
To search for additional stations repeat the above procedure. Search
tuning may be stopped by a single press on either the
or -
buttons
.
6.
Press the
Power button
to turn off your radio.
F M
M W
L W
T u n in g
Operating your radio - manual tuning
1.
Switch on your radio by pressing the
Power button
.
2.
Set the
Waveband switch
to the required waveband. The waveband
selected will appear in the display. On FM fully extend the
Telescopic
aerial
. On MW and LW rotate your radio for best reception.
3.
A single press on either the
or - buttons
will change the
frequency up or down. The frequency steps are:- FM 50kHz, MW 9kHz
and LW 1kHz. Adust the
Volume control
to the required level.
4.
Press the
Power button
to turn off your radio.
F M
M W
L W
T u n in g
7
R9905 Instruction Book.pm6
24/10/99, 14:21
8
