Roberts Poolside 2, Manual, Page: 10 / 24

Setting the clock
1. The clock will start running when the batteries are installed or when the
radio is connected to the mains supply. The display will show " -:--" .
2. The time must be set with your radio switched to the off position.
3. Press and hold down the Time set button until the hour digits fl ash
in the display and a beep can be heard.
4. Press the Tuning up or down buttons to set the required hour. To
advance the time quickly press and hold the Tuning up or down
buttons .
5. Press and release the Time set button , the minute digits will fl ash in
the display.
6. Press the Tuning up or down buttons to set the required minute.
To advance the time quickly press and hold the Tuning up or down
buttons .
7. Press the Time set button to complete time setting. The second digits
will start to count.
4
4
3
5
6
6
7
9