18
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press and release the
On / Off
button to switch on your radio.
2. If needed, press and release the
Band
button to select the FM band.
3. Press and hold the
Info
button until the Advanced FM menu shows
on the display and then release the Info button.
4. Press
the
Tuning Up
or
Down
buttons
until the display shows
'FM
Scan Zone'.
Press and release the
Select
button to enter the scan
zone selection menu.
5. Press
the
Tuning Up
or
Down
buttons to switch between Local and
Distant options on the lower line of the display. The Distant option will
allow the radio to
fi
nd weaker signals when scanning. The current
setting will be marked with an asterisk.
6. Press and release the
Select
button to con
fi
rm your selection. The
radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.
FM
FM Scan Zone
FM Scan Zone
Local
FM Scan Zone
Distant
*
1
2
3
4,5
4,6
4,5
