16
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press and release the
On/Off
button to switch on your radio. Ensure
your radio is in FM mode.
2. Press and release the
Menu
button.
The FM menu will show on the
display.
3. Rotate
the
Tuning/Select
control until
'SETTING'
shows on the display.
Press and release the
Tuning/Select
control to enter the scan settings
menu.
4. Rotate the
Tuning/Select
control to switch between
'LOCAL'
and
'DISTANT'
options. The Distant option will allow the radio to
fi
nd weaker
signals when scanning.
5. Press and release the
Tuning/Select
control to con
fi
rm your selection.
The display will return to the radio display after several seconds. The
Local or Distant setting is stored in the radio and remains in force until
changed or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
1
2
3-5
