System reset
If your clock radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press
On/Off
to switch on the clock radio.
2. Press
Menu/Mode
.
3. Rotate
Tuning
until
'SYSTEM'
appears on the display. Press
Tuning
.
4. Rotate
Tuning
until
'RESET'
shows on the display. Press
Tuning
.
5. Rotate
Tuning
until
'Y'
appears on the display. If you do not wish to carry
out a system reset, select
'N'
. The display will revert to the previous display.
6. With
'Y'
displayed, press
Tuning
. A full reset will be performed. The station
list and presets will be erased. Alarms will be cancelled and settings will
be set to their default values. The display will show
'WELCOME'.
The clock
UDGLRZLOOWKHQUHVWDUWDVZKHQ¿UVWSOXJJHGLQVHHDOVRSDJH
20
Mode
Electro-magnetic compatibility advice
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply may be required.
If the product is used in an environment with any ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance, the product may malfunction.
It will automatically recover to normal when the ESD Immunity / Radiated
Immunity / Conducted Immunity disturbance is stopped.
DC Voltage
7.5V / 1.6A
Recycling
This product bears the selective sorting symbol for
Waste Electrical and Electronic Equipment (WEEE).
This means that this product must be handled
pursuant to European directive 2012/19/EU in order
to be recycled or dismantled to minimize its impact on
the environment.
The user has the choice to give the product to a
competent recycling organization or to the retailer
when buying a new electrical or electronic equipment.
Product markings
Sleep
