61
Brightness control
The brightness of the display can be adjusted for when the radio is in standby and for when
it is in use. If you use the unit in the bedroom, you may prefer a lower standby brightness
level than the standard setting.
There are 4 Standby brightness levels and 3 levels for when the radio is in use.
To change
the current brightness setting please follow these steps.
1.
Apply a long press
on the
Info
button, or choose
'Main menu'
,
'System settings'
then
'Backlight'
to access the display brightness setting.
2. To adjust the display brightness when the radio is switched on select the
'On level'
.
To adjust the display brightness when the radio is in standby select the
'Standby level'
.
Press
Tuning
. The current setting will be marked with an asterisk.
3. Choose either the
'High'
,
'Medium'
or
'Low'
setting. If setting the standby brightness
level there is also an option to set the brightness to
'Very low'
. Press the
Tuning
control to set the level. If the radio is playing, then the chosen brightness will be applied
immediately. If the radio is in standby, then the chosen brightness will be applied after
a 10 second delay.
When the radio is in Standby mode and powered by the mains, pressing a button or
turning a rotary control will cause the radio to switch to the high brightness level for a few
seconds. This is so that even if the standby brightness level is set low, it is still possible
to see the time when needed.
Equaliser
Network
Time/Date
Backlight
Inactive Standby
Language
System settings
On level
Standby level
Backlight
Backlight
High
Medium
Low
*
Backlight
High
Medium
Low
Very low
*