If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
18
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to fi nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press
the
On/Off button
to switch on your radio.
2. If needed, press the
Band button
to select the FM band.
3. Press and hold the
Info button
until the display shows "Mono override"
on the lower line.
4. Press and release the
Tuning up or down buttons
until the display
shows "FM Scan Zone" then press the
Select button
to enter the
scan zone selection menu.
5. Press
the
Tuning up or down buttons
to switch between Local and
Distant options on the lower line of the display. The Distant option will
allow the radio to fi nd weaker signals when scanning.
6. Press
the
Select button
to confi rm your selection. The radio will then
revert to the normal information display. The Local or Distant setting is
stored in the radio and remains in force until changed or until a System
Reset.
Note: The intial setting (out of the box, or after a System Reset) causes
the radio to ignore weak (distant) signals.
3
4,5
4,6
1
2
Summary of Contents for ecologic1
Page 26: ...Notes 25...