43
System reset
If your clock radio fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure. The system
reset can be carried out while the unit is in standby mode or while playing.
1. Press and release the
Menu
button.
2. Press
the
Tuning Up
or
Down
buttons until
'Factory Reset'
appears
on the display. Press and release the
Select
button.
3. Press
the
Tuning Up
or
Down
buttons until
'Yes'
is highlighted on
the display. If you do not wish to carry out a system reset, highlight
'No'
and then press the
Select
button. The display will revert to the
previous display.
4. With
'Yes'
selected, press and release the
Select
button. A full reset
will be performed. The station list and presets will be erased. Alarms
will be cancelled and snooze and sleep timer settings will be set to
their default values. The display will show
'Welcome to Digital Radio'
and the date and time will be set.
5. See
'Using your clock radio for the
fi
rst time'
page 6.
In case of malfunction due to electrostatic discharge, reset the product
using the above procedure. In some circumstances it may be neces-
sary to disconnect and then reconnect the mains power in order to
resume normal operation.
If a problem persists please refer to the guarantee section at the back
of this instruction book which explains how to obtain support for your
clock radio.
1
2,3
2,3
2-4
?
<
<
