31
Software version
The software display cannot be altered and is just for your reference.
1. To view which software version your clock radio has ensure your clock
radio is in DAB mode and press the
Menu button
to enter the menu
setup.
2. Press
the
Skip Up or Down buttons
until "SW Version" together with
the Version number appears on the display.
System Reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, carry out the following procedure.
1. Whilst in DAB mode press and hold the
Menu button
until the
display shows "Press SELECT to confi rm reset".
2. Press and release the
Select button
to select system reset.
A full reset will be performed and the station list together with any preset
stations will be erased.
In case of malfunction for any reason, just reset the product to resume
normal operation. It may be necessary in some cases to disconnect the
mains power and then reconnect after 10 seconds.
In case of malfunction due to electrical fast transient (Burst), just reset the
product (reconnect of power source may be required) to resume normal
operation.
1
2
2
1
2
