background image

Guarantee

This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component 
breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free 
of charge.

The guarantee does not cover:

 

 

 

 

 

 

1. Damage resulting from incorrect use.

      2. 

Consequential 

damage.

 

 

 

 

 

 

3. Receivers with removed or defaced serial numbers.

Procedure:

Any claim under this guarantee should be made through the dealer from whom the instrument was purchased. It is likely that your Roberts' dealer 
will be able to attend to any defect quickly and effi ciently but should it be necessary the dealer will return the instrument to the Company’s service 
department for attention. In the event that it is not possible to return the instrument to the Roberts' dealer from whom it was purchased, please contact 
Roberts Radio Technical Services at the address shown on the rear of this manual.

These statements do not affect the statutory rights of a consumer.

26

Summary of Contents for CRD-19





























Reviews: