Roberts CR9920 Manual Download Page 8

Snooze control

The radio or buzzer alarm can be silenced for 9 minutes by pressing the

Snooze

 button. This sequence can be repeated during the alarm cycle (1

hour 59 min).  The Snooze control can also be operated via the Pillow Talk
Remote - see following page.

Sleep timer

The radio can be set to turn off after a preset time has elapsed.

Press and hold down the

 Sleep

 button until the desired time is reached

(maximum 59 minutes in 1 minute steps). The radio will switch off after
the sleep time has elapsed. To increase the sleep time by one hour,
depress the hour button once whilst holding down the 

Sleep

 button. The

clock will display the sleep time 1:59.

To cancel the sleep function before the preset time has expired, press
the 

Snooze button

. The sleep function  can also be cancelled via the

Pillow Talk Remote - see following page.

PM

7

Dimmer Switch

The 

Dimmer switch

 located on the left side of your clock radio will allow

you to adjust the intensity of  the clock display to suit room brightness.

High Low

Dimmer

Headphones (on rear)

Headphone Socket 

 (3.5mm) is provided for use with either headphones

or an earpiece. Inserting a plug automatically mutes the internal loud-
speaker.

A la r m / O ff

A la rm / O ff

Summary of Contents for CR9920













Reviews: