Setting the alarms to wake to sounds natural
Your clock radio can be set so as to wake you to any one of the following
natural alarm sounds :- Birds, Ocean, Stream, Chimes. The alarm sounds
gradually increase in volume reaching maximum level after 10-15 seconds.
1.
Set the alarm time as previously described. Set the
Function switch
to the 'Natural' position. Set the
Alarm selector switch
to the '
1
',
'
2
' or '
1 + 2
' position. The corresponding
Alarm indicators
will
light.
2.
Set the
Sounds natural switch
located on the rear of your clock radio
to the desired wake up sound. The coresponding
Alarm sound
indicator
will light up. The natural alarm will sound every day at the
preset time for 59 minutes. To turn off the alarm until the next day press
the
Alarm/Off
button
. To turn off the alarms permanently set the
Function switch
to the 'Off' position.
3.
To sample the alarm sounds set the
Function switch
to the 'Natural'
position, select the required sound using the
Sounds natural switch.
Press the
Snooze button
to hear a sample of the alarm sound. This
sample facility is not available whilst the alarms are active.
Setting the alarms to wake to radio
1.
Set the alarm time as previously described. Set the
Function switch
to the 'Radio' position. Set the
Alarm selector switch
to the '
1
',
'
2
' or '
1 + 2
' position. The corresponding
Alarm indicators
will
light. Ensure that a station is tuned in and the
Volume control
is set
to the required level. The minimum volume setting on radio alarm is
factory set to ensure there is always adequate wake up volume .
The radio alarm will operate every day at the preset time for 59 minutes.
To turn off the radio alarm until the next day press the
Alarm/Off
button
. To turn off the alarms permanently set the
Function switch
to
the 'Off' position.
Notes: Your clock radio is fitted with a If an alarm time has not been
set and the
Function switch
is left in the 'Natural' or 'Radio' position,
the natural or radio alarms will operate at 12:00 midnight. If you do not
require the alarm function, ensure that the
Function switch
is set to
the 'Off' position.
7
P M
1
2
P M
1
2
O ff N a tu r a l R a d io O n
2
1 + 2
1
O ff N a tu r a l R a d io O n
2
1 + 2
1
S o u n d s N a tu r a l
C h im e s S tre a m O c e a n B ird s
CR9900 Instruction Book.pm6
24/10/99, 13:44
8
