17
Recalling a preset station
1. Press and release the
On/Standby
button to switch on the radio.
2. Select the required waveband as previously described.
3. Press and release the required
Preset
button. Your radio will tune to
the station stored in preset memory.
• The display will show
'EMPTY '
if no station has been stored to that
preset.
Presetting stations
You may store your preferred DAB and FM radio stations to the preset
station memories. There are 6 memory presets in your radio, 3 for DAB
and 3 for FM. Presets are remembered by your radio in the event of a
power failure. The procedure for setting presets and using them to tune
to stations is the same for FM and DAB modes and is described below.
1. Press and release the
On/Standby
button to switch on the radio.
2. Select the desired waveband and tune to the required station as
previously described.
3. Press and hold the required
Preset
button until the display shows, for
example,
'P1 SAVED'
. The currently tuned station will be stored under
the chosen preset button. Repeat this procedure for the remaining
presets as needed.
4. Stations which have been stored in preset memories may be over
written by following the above procedure.
1
3
1
3