Roberts 10-282G-2, Owner'S Manual

Page: 4 / 22

– 4 –
MAINTENANCE OF NON-STICK COATED BASE PLATE
1. The base plate is coated with a tough non-stick coating, to provide a long
lasting easy to clean surface. To preserve this finish, please follow these
steps:
b. Always put the iron in its holder when not seaming.
c. Never try to clean the base with a wire brush, knife or
any hard material.
d. Do not place your iron on concrete or other hard surfaces.
Put the iron in its holder, when storing it in your toolbox.
e. ALWAYS CLEAN YOUR IRON AFTER A JOB.
2. To clean your iron, rub the base over a piece of clean carpet scrap while
the iron is still hot.
Specifications
10-282G-2, 10-286G and1 10-482G
Amps 6.6A
Watts 800W
Approx Heat Range 125.6° F ~ 428° F (52° C ~ 220° C)
Volts ~120