Caring for the Heater
21
ROBERTS
-
GORDON
Inside Venting
Venting must be intact. Look for cracks on
the vent, gaps in the sealed areas or rust.
The area must be free of dirt and dust.
Contact a licensed contractor for repair.
Inlet must be intact. Look for cracks on the
tube, gaps in the sealed areas or rust.
Make sure nothing is blocking the vent.
The area must be free of dirt and dust.
Contact a licensed contractor for repair.
Make sure there are no cracks.
Contact a licensed contractor for repair.
Contact a licensed contractor for repair.
There should be no exposed wire or damage
to the thermostat.
Safety tag must be mounted over thermostat.
Contact a licensed contractor for repair.
Make sure the heater is hanging securely.
Look for signs of wear on the chain or ceiling.
Contact a licensed contractor for repair.
The grille must be securely attached. If the
grille is loose or off, contact a licensed
contractor for repair.
Empty condensate(water) periodically.
Make sure nothing is lodged in screen.
Immediately remove objects.
The screen must be securely attached. If the
screen is loose or off, contact a licensed
contractor for repair.
See Page 18 for location of bird screen.
Outside Air Inlet
Heat Exchanger Tubes
Gas Line
Thermostat
Suspension Points
Protective Grille
(included with select models)
Condensate Pail or Bucket
(only when roof vented)
REMEMBER TO CHECK:
Bird Screen
Summary of Contents for CARIBE GTH
Page 25: ......
