E N
EN -22-
5.1.4 LED
source
•
Do not touch the surface of the LED source (no contact with your hands or any tools).
•
Do not put compressed air directly on the source.
•
Contact a certified RJ distributor in case of residuals or other objects located on the
surface of the LED source.
5.1.5 Optics
The cleaning of optical parts (lenses) shall be carried out with solutions containing alcohol.
Lens tube access
5.2 Analysis
If there is still a problem after the troubleshooting procedures (see part 6.), contact RJ distributor with
the following information:
•
Model, version and serial number of the product.
•
Software version (available in menu
5/6 Fixture Info
)
•
Description of the problem.
5.3 LED
reaction
according to LED temperature
5.4 Thermal
protection
In case of thermal protection start
4
:
•
Remove the LED compartment (See
5.1.4 Dismantling the LED compartment).
•
Control
possible
overheating indications.
•
Reassemble the LED compartment.
•
Reset the thermal protection by pressing the button.
5.5 Adjusting
the
maximum light output level
The maximum intensity level of the LED source can be adjusted in the
3/6 Fixture Param.
Maximum
setting
menu in order to have a consistent fixture fleet. The dimming level is then recalculated
depending on the limitation.
5.6
Exploded view / Spare parts list
Available on
www.robertjuliat.com
LED temperature
Fan
5°C
60°C
Fan rotation at minimum level
60°C
70°C
Fan rotation increases progressively
70°C
90°C
Fan at maximum speed
LED intensity dims to zero output (overheating protection)
DMX and system LED feedback is red and temperature is available in
4/6 Fixture Tools menu
