EN
EN - 8 -
3.3.2 Art-Net / sACN
Protocol
Input connector
Output connector
Art-Net
sACN
RJ45
-
Protocol
Input connector
Output connector
Art-Net
sACN
RJ45
DMX
3.3.3 Ethernet / DMX node
Network
switch*
Art-Net
sACN
(*) A 1000 base-T switch that supports IGMP (Internet Group Management Protocol) is necessary if the unit is connected
to a network switch to control multiple devices. The usage of non IGMP switch capability can cause erratic behavior of all
connected devices.
For further reading: https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
RJ-LED2 FIRMWARE PLATFORM (Node Mode) full manual is available for download at robertjuliat.com/LED/PDF_PAGE
Web
interface
Web
interface
Lighting desk
Lighting desk
Daisy chain:
Fixture
Fixture
Fixture
Network
switch
Fixture
Fixture (NODE)
Fixture
- Node
function must be activated only on the first unit of the daisy chain
(see
Web Interface
section of the manual).
- Web interface
is always available regardless of the protocol (Art-Net / sACN) selected.
DMX
Art-Net
sACN
Limited to
15 Fixtures
Daisy chain:
