10
of current step. You can change either step. For example, if you want to shorten the program, set the desired step
as last by pressing the STEP- button repeatedly. The little dot shines behind the number of step. If you press the
STEP- button again, the little dot will be switched Off. By this procedure you can change all steps.
Completion of programming
Press and hold the ENTER- button and let the PROGRAM-button loose so that the PROGRAM-LED stops
flashing. The current step is written into memory and the programming mode is finished.
6. Technical specifications
Power supply:
100-125V,200-240V AC, 50/60Hz ~
Power consumption:
5 W
Number of control channels:
24
Sound control:
either via ¼” Jack or built-in microphone
Sound input:
¼” mono Jack
Audio-sensitivity:
0.3 - 1 V
DMX 512-output:
3-pin XLR-connector
Pre-programed programs
20
Free chasers:
10 with up to 32 steps
Weight:
2 kg
Dimensions:
7. Cleaning and maintenance
DANGER!
Disconnect from the mains before starting any
maintenance work
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. More complicated maintenance and service operations are only
to be carried out by authorized distributors.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized distributors only in
order to avoid hazards.
8. Appendix
We believe you will enjoy your DMX CONTROL 24 PRO CT. We assure you will enjoy this product for years if
you follow the instructions given in this manual.
If you have any questions and comments, please do not hesitate to contact us.
Specifications are subject to change without notice.
Version 1.0
