Robe ROBIN ParFect 150 FW, User Manual

Page: 23 / 36

23
Included items
ROBIN Parfect 150: 1 x ROBIN Parfect 150
1 x Accessory frame adaptor for Parfect 150 (P/N 99015324)
(installed on the fixture)
1 x User manual
ROBIN Parfect 150 FW: 1 x ROBIN Parfect 150 FW
1 x Accessory frame adaptor for Parfect 150 (P/N 99015324)
(installed on the fixture)
1 x User manual
Optional accessories
(P/N 10980127) Robe Wireless CRMX-LB100
(P/N 10980346) EggCrate for Robin LEDBeam 150
(P/N 10980348) HALO Frame adaptor for Robin ParFect 150
(P/N 10980349 Barndoor for Robin ParFect 150
(P/N 10980372) Gel Frame for Parfect 150
(P/N 10980373) Diffusion filter 2°
(P/N1305 1731) Mains Cable PowerCon In/open ended, 2m
( P/N 1305 1724) Mains Cable PowerCon In/Schuko, 2m
( P/N 1305 1725) Mains Cable PowerCon In/CEE 16A, 2m
( P/N 1305 1726) Mains Cable PowerCon In/US, 2m
( P/N 1305 1727) Daisy Chain PowerCon In/Out, EU, 2m
( P/N 1305 1728 ) Daisy Chain PowerCon In/Out, US, 2m
9. Maintenance and cleaning
DANGER !
Disconnect from the mains before starting any
maintenance work
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should solvents be used!
Never use solvents for cleaning lenses in the moving head!
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
Lenses may require monthly cleaning as smoke-fluid tends to building up residues, reducing the light output
very quickly. The cooling fans should be cleaned according to the situation (at least annually).
The interior of the base should be cleaned at least annually using a vacuum-cleaner or an air-jet.
More complicated maintenance and service operations are only to be carried out by authorized distributors.
9.1 Replacing the fuse
Replace the fuse by a fuse of the same type and rating only.
Before replacing the fuse, unplug mains lead!
1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing (anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuseholder in the housing and fix it.
9.2 Disposing of the product
To preserve the environment please dispose or recycle this product at the end of its life according to the local
regulations and codes.