Robe Robin MMX Blade, User Manual, Page: 27 / 47

7
Fr. Shutter 3 Move - Fr. lamella 3moving Fr. Shutter 4 Move - Fr. lamella 4 moving
Fr. Shutter 3 Swiv. - Fr. lamella 3 swivelling Fr. Shutter 4 Move - Fr. lamella 4 swivelling
With these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment
screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for the next effects.
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibration via the DMX controller
1. Connect DMX controller to the fixture and set fixture effects to the desired positions before fine calibration.
2. Enter the "Calibrate Effects" menu and now you can exactly calibrate desired effects by DMX controller.
A calibration protocol:
Effect Mode 1 Mode 2 Mode 3
Pan channel 46 channel 40 channel 38
Tilt channel 47 channel 4 channel 39
Colour wheel channel 48 channel 4 channel 40
Cyan channel 49 channel 43 channel 4
Magenta channel 50 channel 44 channel 4
Yellow channel 5 channel 45 channel 43
CTO channel 5 channel 46 channel 44
Rot. Gobo Wheel channel 53 channel 47 channel 45
R.Gobo Index channel 54 channel 48 channel 46
Prism channel 55 channel 49 channel 47
Iris channel 56 channel 50 channel 48
Zoom channel 57 channel 5 channel 49
Focus channel 58 channel 5 channel 50
Hot-Spot channel 59 channel 53 channel 5
Dimmer channel 60 channel 54 channel 5
Dimmer channel 6 channel 55 channel 53
Effect Wheel Pos. channel 6 channel 56 channel 54
Fr. Reset M channel 63 channel 57 channel 55
Fr. Reset M channel 64 channel 58 channel 56
Fr. Reset M channel 65 channel 59 channel 57
Fr. Reset M channel 66 channel 60 channel 58
Fr. Reset 3 M channel 67 channel 6 channel 59
Fr. Reset 3 M channel 68 channel 6 channel 60
Fr. Reset 4 M channel 69 channel 63 channel 6
Fr. Reset 4 M channel 70 channel 64 channel 6
Fr. Shutter Move channel 7 channel 65 channel 63
Fr. Shutter swiveling channel 7 channel 66 channel 64
Fr. Shutter Move channel 73 channel 67 channel 65
Fr. Shutter swiveling channel 74 channel 68 channel 66
Fr. Shutter 3 Move channel 75 channel 69 channel 67
Fr. Shutter 3 swiveling channel 76 channel 70 channel 68
Fr. Shutter 4 Move channel 77 channel 7 channel 69
Fr. Shutter 4 swiveling channel 78 channel 7 channel 70
After having calibrated all effects, touch the [confirm] to save adjusted values and reset the fixture.
Load Default Calibrations
- The item loads default (factory) calibration values.
Updating software - The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP or Linux
- DMX Software Uploader
- Flash cable RS3/DMX No.305064 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)