Robe ROBIN LEDBeam 350, User Manual

Page: 19 / 39

19
Mode 2 - 16 control channels
Mode 3 - 24 control channels (default)
Pan Rev - Pan reverse . The item allows to invert pan movement.
Tilt Rev - Tilt reverse . The item allows to invert tilt movement.
P/T Mode - Pan and Tilt movement mode . Use this menu to set mode of the pan/tilt movement.
Speed - both Pan and tilt will move with the same speed as adjusted at the channel 5 "Pan/Tilt speed,
Pan/Tilt time".
Time – the pan and tilt will move with different speeds and they will come at
the same time to the end point of their tracks (pan and tilt use their optimal speeds).
Time of the pan/tilt movement (25.5 sec. max.) is set by the channel "Pan/Tilt speed, Pan/Tilt time".
P/T Feed - Pan and Tilt Feedback . The menu item allows to return the mowing head to the required pan/tilt
position after changing the position by an external force if this option is set on.
Note. The Pan/Tilt Feedback should be permanent On, the option Off is not suitable for standard operation and
the head of the fixture can be damaged!
Pan range - Pan movement range . The menu item allows you to select desired pan movement range:
Standard - pan movement range is 540°
Reduced - pan movement range is 450°
Display - Display adjusting . This menu allows you to adjust the display behaviour.
Turn - this function turns the display by 180°.
On/Off T - this function allows you to keep the display permanent on or turn it off two minutes
after last pressing any button on the control panel.
Contrast - use this function to adjust contrast of the display (0-100%).
Backlight - use this function to adjust backlight of the display (0-100%).
BLC DMC - Blackout during movement correction . Set this option on if you wish to close light
output during the time when the head goes to its correct position, which has been changed by an
external force.
BLC P/T - Active blackout . The menu item allows to close light output while the pan/tilt DMX values are
changing.
C Mix M - Colour mixing mode . This item allows you to switch into RGBA or CMY mode. In the CMY mode,
the ambwee(8bit)/amber (16) bit channels are not active.
L Out M - Light output mode . Use the menu to select desired light output mode.
H Int - high intensity
CRI - high CRI
White P - White Point 8000K . If the function is on, the CTC channel allows to set desired white in range of
8000K-2700K (0 DMX=8000K, 255 DMX=2700K). Necessary condition is , that RGBA channels have to be full
or set at the same DMX values, e.g. 150.
If this function is off, the range of whites is not uniform and may be different for each fixture.
Mic Sens - Microfon sensitivity . Enter the menu if you want to adjust the microphone sensitivity ( 0-max.,
19-min.).
Fans - Fans setting . Use the menu to set behaviour of fixture fans.
FansMode - the menu allows you to select desired power of fans:
High - max. power of fans
Auto - auto-control mode
Quiet - If the options is selected, power of fans can be set in the menu "Noise L."
BLC Fans - the menu item allows you to stop all fans in the fixture (option "On") when its light output
is closed (shutter in range of 0-31 DMX or dimmer in 0 DMX).
Noise L. - the menu item allows you to set speed of fans. At low speed of fans the light output may be
reduced.