Robe Robin CycPix 12, User Manual

Page: 21 / 29

CycPix 12
21
6.5 Test program (Test Prg)
Use this menu item to run a special demo-test sequences without an external controller, which will show you some
possibilities of using Robin CycPix 12.
6.6 Stand-alone (St Alone)
Auto Run - Presetting playback . This function allows you to select the program which will be played in the stand-
alone mode after switching the fixture on. Selected program will be played continuously in a loop.
Off - The option disables „Auto Run” function.
Test - The option will start built-in test program.
User - The option will start user-created program
Pr Play - Playing program . Select this menu to run a user-created program in a loop.
Test Prg - The option runs built-in test program.
User Prg - The option runs user-created program
Select the program you wish and press [ENTER]. The selected program starts running. By Pressing [ENTER] again,
program pauses running.
Pr Edit - Editing program . Select this menu to edit or create the program. The Robin CycPix 12 has one built-in
program and one user-editable program up to 40 steps. Each program step has a step time during which effects
last in the current step.
To edit program:
Procedure:
1. Press [UP] or [DOWN] to select the menu "Pr Edit" and press [ENTER].
2. Press [UP] or [DOWN] to select the desired program step and press [ENTER] button.
3. Press [UP] or [DOWN] to select the desired item and press
[ENTER] button. Now you can edit by [UP] or [DOWN]
buttons the DMX value (0-255) for selected item:
Prg End. a total number of the program steps (value 1-40). This value you should be set before
starting of programming (e.g. if you want to create program with the 10 steps, set Prg End=10).
Stro a strobe/shutter
Dimm a dimmer
Powr a power/special functions R L 1 a red LED pixel 1
R L A red LEDs (all pixels) G L 1 a green LED pixel 1
G L A green LEDs (all pixels) B L 1 a blue LED pixel 1
B L A blue LEDs (all pixels) Dim 1 a dimmer for pixel 1
W L A white LEDs (all pixels) : :
CTO a colour temperature correction R L 12 a red LED pixel 12
Vir C a virtual colour G L 12 a green LED pixel 12
Pix E pixel effects B L 12 a blue LED pixel 12
Pix E pixel effects Dim 12 a dimmer for pixel 12
Px E S a pixel effect speed S.Tm a step time (0-25.5 sec)
Zoom a zoom movement COPY copying the current prog. step to
the next prog. step
4. Press [ENTER] button to confirm adjusted value .
5. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 3 - 5).
6.7 Reset
This option resets zoom system of the fixture