Robin CycBar UV
9
3.4 Wireless DMX operation
The wireless version of the Robin CycBar 15 is equipped with the Lumen Radio CRMX module and antenna for
receiving DMX signal. CRMX module operates on the 2.4 GHz band.
1.
Select option Wireless DMX input from the menu
PErS
(PErS-->dM.In.--> VirL.).
2.
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu
item “
SiGn
“ (SPEC-->rAdI -->SiGn.)
3.
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “
unLi
“ (SPEC-->rAdI-->unLi.)
3.5 Inserting the black glass
Design of the Robin CycBar UV allows you inserting black glass in front of the glass cover of the CycBar UV. The
black glass consisst of four parts (three shorter and one longer). Always insert all parts of the black glass into
fixture.
Note. To keep declared ingress protection, do not disassemble side covers of the fixture!
To insert black glass:
1. Disconnect the fixture from mains and allow it to cool.
2. Press and hold a lock (1) and insert two shorter parts (2) of the black glasss. Release the lock (1).
3. Press and hold the lock (1) on the opposite side of the Robin CycBar UV and insert the shorter part (2) and longer
part (3) of the black glass. Release the lock (1).
4. Check that all parts of the black glass are inserted properly and cannot slide out from the fixture.
Summary of Contents for Robin CycBar UV
Page 1: ...Version 1 2 ...
