14
8. Functions of the control panel
The control panel situated on the top cover of the fixture offers several features. You can simply set the DMX
address or master (slave) mode,switch On and Off the lamp,run a test,make a reset and also use other func
-
tions for setting fixture behaviour.
Control elements on the control board:
[ENTER] button- enters menu,confirms adjusted values and leaves menu.
, [UP] button and[DOWN] button- moves between menu items on the the same level, sets values.
In order to leave the menu without saving value,press [UP] and [DOWN ] at the same time.
After switching the fixture on,the display shows the initial DMX address:
Use [UP],[DOWN] to browse through the menu. To select a function or submenu,press [ENTER].
8.1 Fixture Address
Use this menu to set the DMX address of the fixture which is defined as the first channel from which the fixture
will respond to the controller.
For address setting follow this procedure:
1.
Switch On the fixture and wait until the fixture reset has finished (
"rES"
is flashing at the display).
2.
Browse through the menu by pressing the [UP] and [DOWN] keys until the display shows current addres
"001"
.Confirm by pressing [ENTER] key and
"001"
will start to flash frequently.
3.
Use the [UP] and [Down] keys to select the desired address.
4.
Confirm by pressing [ENTER].
After having addressed fixture, you may now start operating fixture via your lighting controller.
8.2 Microphone sensitivity
Select this function to adjust the microphone sensitivity from 1(maximum) to 20(minimum).
8.3 Lamp On/Off
Select this item to switch the lamp on/off
.
Note:if DMX signal is present on the data link,the lamp will be switched automatically on.
8.4 Lamp preseting
Select this menu to change the lamp "behaviour".
LA.A.
---
Strike lamp automatically
.Select this function to turn the lamp on automatically after switching the
fixture on.
d.OF.
---
Lamp OFF if DMX is missing
. This function allows you to switch Off the lamp automatically if DMX
signal is missing on the data link.
Summary of Contents for Flare CB Series
Page 1: ...Version 1 0 ...
