0
totL
--- The function shows the total number of the operation hours with the lamp on since
the ClubWash 50 has been fabricated.
rSEt
--- The function shows the number of the operation hours with the lamp on that the
ClubWash 50 has been powered on since the counter was last reset.In order to
reset this counter to 0 you have to hold [UP] and[DOWN ] and press the [ENTER].
LA.St.
---
Lamp strikes
.Select this submenu to read the total number of the lamp strikes.
totL
--- The function shows the total number of the lamp strikes since the ClubWash 50
has been fabricated.
rSEt
--- The function shows the number of the lamp strikes since the counter was last
reset.In order to reset this counter to 0 you have to hold [UP] and[DOWN ] and press
[ENTER].
Hi.tE
---
Max.fixture head temperature
.Select this submenu to read the max. fixture head temperatures
(°C).
totL
- The function shows the max.temperature of the head inside since
the ClubWash 50 has been fabricated.
rSEt
- The function shows the maximum temperature of the head inside
since the counter was last reset.In order to reset the counter to 0 you have
to hold [UP] and[DOWN ] and press the [ENTER].
tEMP
---
Current fixture head temperature
.Select this submenu to read the current fixture head temperature
(°C). Temperatures below 95°C are not critical. 95° C and more lead to the lamp being switched off.Please
note that the outside temperature should not exceed 40° C.
DM.In.
---
Readout of DMX values
.Select this function to read DMX values (0-255) of each channel received
by the fixture.
PAn
a coarse pan movement
Colo
a colour wheel
F.PAn
a fine pan movement
Stro.
a shutter,strobe
tilt
a coarse tilt movement
dimr
a dimmer
F.tilt
a fine tilt movement
SpEd
a pan/tilt speed
Func.
a special function
VErS.
---
Software version
.Select this function to read the software version of the display module.
9.4 Personality
Use this menu to to modify ClubWash 50 operating behavior.
r.PAn
---
Pan reverse
.Select this function to invert the pan movement.
r.tilt
---
Tilt reverse
.Select this function to invert the tilt movement.
LA.Pr.
---
Lamp presetting
.Select this menu to change the lamp "behaviour".
LA.Au.
--- Select this function to turn the lamp on automatically after switching the
fixture on.
d.L.OF.
--- Select this function to switch off the lamp via DMX.
dM.On
--- This function allows you to strike the lamp automatically after 6 seconds if DMX
signal is present on the data link.If the ignition is unsuccessfull (e.g.lamp is too hot),the
fixture will try to ignite the lamp after next 26 s.This process will repeat until the lamp lights.
dM.OF.
--- This function allows you to switch Off the lamp automatically after minutes if
DMX signal is missing on the data link.
16b.r.
---
16bit resolution
.If this function is on,the fixture uses 16 bit resolution for pan/tilt movement (10 DMX
control channels).
