CitySource 96 (RGBW)
20
6.7 Special functions
rdML
---
Code
.This menu item shows the first part of the RDM identification code.
rdMH
---
Code
. This menu item shows the second part of the RDM identification code.
AdJ
---
Effect Adjustment.
The menu allows calibration of each LEDs array.
dMH
---
DMX Values.
The menu item enables to control all LEDs before calibrating each LEDs array.
CAL.U
---
Calibrating unit.
The menu serves for fine current calibration of LEDs during fixture burn-in at
a factory. Each LED array can be calibrated separately. Users should not change the setting.
vAdI
---
Wireless DMX.
The menu serves for reading of the wireless operation status (only for WDMX version).
v.InF.
---
Wireless DMX information.
The menu item shows level of received signal in %. If the fixture is not
linked to the transmitter, “
no.LI
” is displayed.
v.UnL.
---
Wireless DMX unlink.
The item serves for unlinking the fixture from transmitter
uPd.M.
---
Updating mode
. The menu item allows you to update software in the fixture via either serial or USB port
of PC.
The following are required in order to update software:
- PC running Windows 95/98/2000/XP or Linux
- DMX Software Uploader
- Flash cable RS232/DMX No.13050624 (if you want to use a serial port of PC)
- Robe Universal Interface (if you want to use an USB port of PC)
Note1: Software update should execute a qualified person. If you lack qualification, do not attempt the update
yourself and ask for help your ROBE distributor.
Note 2: DMX address, programs 1-3 and all items in the menu "PErS" will be set to their default values.
To update software in the fixture:
I
. Installation of the DMX Software Uploader.
1.
DMX Software Uploader program is available from the ROBE web site at WWW.robe.cz.
2
. Make a new directory ( e.g. Robe_Uploader) on your hard disk and download the software to it.
3
. Unpack the program from the archive.
.
II.
Fixture software updating.
1.
Determine which of your port is available on your PC and connect it:
-
with the DMX input of the fixture if you using the flash cable RS232/DMX
-
with the DMX input of the Robe Universal Interface if you using the USB cable.
Disconnect the fixture from the other fixtures in a DMX chain. Turn both the computer and the fixture on.
Make sure the lamp is switched off (only if the fixture involves a lamp).
2.
Switch the fixture to the updating mode:
1
Use the UP/DOWN buttons to find “
SPEC.
“ menu.
2
Press the ENTER button.
3
Use the UP/DOWN buttons to select “
uPd.
“ item.
4
Press the ENTER button
5
Use the UP/DOWN buttons to select “
yES
“ option
6
Press the ENTER button
Note: If you do not want to continue in software update, you have to switch off and on the fixture
to escape from this menu.
3
. We recommend to cancel all running programs before start of the Software Uploader.
4
. Run the Software Uploader program. Select desired COM and then click on the Connect button.
Summary of Contents for CitySource 96 WDMX
Page 1: ...Version 1 6 ...
Page 27: ...CitySource 96 RGBW 27 ...
