5
5. Replacing the ArcPix
In case that some ArcPix in a chain of ArcPixes is faulty, cut it off and use the new ArcPix and two connection
boxes to repair faulty pixel in the ArcPix chain.
1
. Unscrew the faulty ArcPix and both adjacent ArcPixes.
2.
Cut away the faulty ArcPix (carefully check the length of the new ArcPix cable),
3
. Separate cores in length cca 40mm on the end of the 5-wire flat cable (1).
4.
Insert the 5-wire flat cable (1) from old and new ArcPix through the bushing (2) into the base of the connection
box (3) until it touches two distance pins (4) in the termination box (3) and align the cores into cutting edges.
Check the position orientation of the new ArcPix before connecting it into connection boxes.
Point of orientation is the row of pins on the ArcPix´s PCB:
To keep the same light characteristic of
the new ArcPix as the rest of ArcPixes,
the position of the row of pins has to corre-
sponds with the pin position on adjacent
ArcPix (es).
Summary of Contents for ArcPix-US
Page 7: ...7 ...