
Eminere Wireless DMX
13
5. After connecting wires to the connector, tighten the three data wires (D+,D-, 0V) by means of the cable binder
(7).
6. Screw the clamp ring (3) to the connector (1), insert the seal (4) to the clamp ring (3) and tighten the sealing nut
(5) enough. During the steps DO NOT TWIST the cable (6).
7. Use the same procedure to assemble the connector on the second end of the cable.
IMPORTANT
Do not bend the cable near to the connector, minimum distance for bending is 50mm.
Summary of Contents for ANOLIS
Page 1: ...Version 1 8 ...