Eminere Inground Wireless DMX
11
DMX addressing of connected Emineres Inground has to be done manually by means of the Robe Universal
Interface WTX and the software RDM Manager.
Direct visibility between a transmitter and the Eminere Inground Wireless DMX must be ensured without
no obstacles (bildings, trees, cars....).
The angle between the ground with the Eminere Inground Wireless DMX and the transmitter´s antenna has to be
more than 10°. Distance between a DMX transmitter and the Eminere Inground Wireless DMX depends on
transmission range of used DMX transmitter, surrounds etc (we recommend to test behaviour of DMX transmitter
with the Eminere Inground Wireless DMX before installation).
.
Examples of connection
The Eminere Inground can be only linked to a transmitter by running the link procedure at DMX transmitter .
The Eminere Inround can be unlinked from the transmitter by running the unlink procedure at DMX transmitter or
by switching off/on the Eminere Inground three times while the transmitter is switched off.
During off/on unlink procedure, the Eminere Inground has to be switched on for 5 seconds in steps 1-3:
Step 1: Eminere Off, Eminere On (5s)
Step 2: Eminere Off,Eminere On(5s)
Step 3: Eminere Off, Eminere On (5s)
Step 4: Eminere Off, Eminere On
Successful unlink is signalized by flashing LEDs at fourth switching the Eminere inground Off and On. If the LEDs
flashing will not appear, probably the 5 seconds period has not been kept and you have to repeat the Off/On
procedure to unlink the fixture from the DMX transmitter .
Summary of Contents for Anolis Eminere Inground 2 Wireless DMX
Page 1: ...Version 1 3 ...
