Robe Anolis Ambiane XP56, User Manual

Page: 3 / 23

Ambiane XP56 Recessed
3
1. Attention
The unit must be installed by a qualified electrician in accordance with all national and local electrical and
construction codes and regulations.
The unit was designed for indoor use only.
Do not install the unit near highly inflammable liquids or materials.
Do not allow anything to rest on the unit.
Do not install the unit near an open flame.
Do not install the unit in dirty, dusty or badly ventilated location.
The unit has to be grounded.
A ceiling (structure) intended for installation of the unit(s) must safely hold at least 5 times the weight of the unit(s)
fastened on it.
Sufficient air accessing to the housing of the unit has to be ensured, there must not be any heat or anti-noise
insulation within a 1m x 1m area around the unit (non-IC rated fixture).
Avoid looking directly into the light beam at close range!
Suitable for fastening on Unsuitable for covering by heat insulation
non-flammable surfaces only material
Immunity of the equipment is designed for electromagnetic environments E1, E2, E3 according to the standard
EN55103-2 ed.2 Electromagnetic compatibility. Product family standard for audio, video, audiovisual and
entertainment lighting control apparatus for professional use. Part 2: Immunity.
The
equipment
(covers and cables) must not be exposed to a high frequency electromagnetic field higher than
3V/m.
The installation company should check levels of possible interferences above the tested levels E1,E2,E3 given by
this standard (e.g. transmitters in surrounding area) before installing the equipment.
Emission of the equipment complies with the standard EN55032 Electromagnetic compatibility
of multimedia equipment – Emission Requirements according to class B.