Order No.
8294Li/D
Supplementary operating instructions
POWER PEAK Infinity 2 LI
12
The working display now appears on the
screen. The screen shows:
The charge process is stopped by the auto-
matic charge termination circuit; alternatively
you can interrupt it by pressing the STOP
(START) button.
The status display then changes from C =
Charge to R = Ready.
2. Selecting the buzzer tone series
The tone series of the piezo buzzer can be
selected from five different options. Move to
the SOUND set-up menu and select your
preference using the
->
or
<-
buttons.
3. Automatic mini-battery mode
A special automatic mode has been added
which provides for optimum charging of
slow-fly flight packs and small, low-capacity
receiver batteries.
The Current Select menu is now expanded as
follows:
- Current select MAN = manual
- Current select AUTO = automatic mode for
standard batteries
- AUTO MINI C.S. = automatic mode for
small batteries
4. Tx-Rx output with automatic charge ter-
mination
The Tx-Rx charge output now also features
an automatic Delta-Peak charge termination
circuit which automatically ends the charge
process when the transmitter or receiver bat-
tery is fully charged.
Note:
The charge process at the Tx-Rx output can
be started by pressing any button.
If no battery is connected to the “Output 0.1
… 5A” output, the warning “Check! NO BAT-
TERY INSERT BATTERY” appears on the
screen; this only applies to the main charge
output
Specification:
Input:
11 - 15 Volts DC
Cell count:
NC / NiMH battery:
1 … 30 cells
Lead-acid battery:
1 … 6 cells
Lithium battery:
1 … 5 cells
Charge current:
0.1 … 5 A
Discharge current:
0.5 … 5 A
Charge termination:
Automatic
NC / NiMH:
Digital Delta-Peak
Lead-acid / Lithium batteries:
Voltage-dependent
Status
Battery voltage
Charge current
Battery type
Capacity
Time hr:min:sec
