LEDs
We start with the button board.
Attach and solder the sixteen
LEDs as shown in the picture.
Please pay attention to the
polarity of the LEDs. The long
leg comes into the + hole, the
short leg into the - hole.
1
Assembly Guide
With these assembly instruc-
tions, you can easily build your
own SWT16. All required com-
ponents are included in this kit.
You need the following tools:
soldering iron, wire cutter and
solder. Also a desoldering pump
and a nut driver.
Read the instructions carefully
and follow the steps in the
correct order. Robaux wishes
you much fun building the
Sweet 16.
