Page
8
Inserting Shelf Panels
ET series trolleys are supplied with the shelf panels. Refer to page 1 for quantities. Note
that ETI series trolleys
do not
have shelf panels supplied.
Note: If you have purchased ETP panels with your trolley then assemble those panels
first, before you install the shelf panels. Refer to page 9 for this step and return to this
step after the ETP panels have been installed.
1. Wipe down the trolley frame removing any excess machine oil.
2. Peel the plastic protective coating off the shelf panels.
3. Place the smaller outer shelf panels (300mm wide) in place first. If your trolley has been
supplied with additional larger shelf panels (325mm wide) then place them in between the
outer panels to complete the shelf. These panels do not require any fixing the simply lay in
position on the trolley frame. Refer to the image below.
