5
6
Installation
Instruction
1.The
minimum
distance
between
the
cooktop
and
surrounding
objects is 15cm, and it needs at
least 100cm net height on the top of cooktop. If installing range hood, please adjust space according
to the installation instruction of range hood. (Picture 1).
2.The cabinet to install built-in gas hob should have installation size with good ventilation, and the
square shouldn’t be less than 100
, or it may cause explode because of leakage.
3.If connected by special rubber tube, one side of rubber tube should connect gas valve, and another
side should connect intake. ( Notice: please take down the protective caps of the joint before
connecting).The special rubber tube should cover the red mark in the joint and lock it with anchor ear.
After testing leakage, the gas hob can be used.
4. Please install gas hob according to cut-out size, and put gas hob on the installation size properly.
5.Screw off
φ
9.5 soft pipe’s connector firstly, if users want to use G1/2 inch connector, then put
rubber gasket on connector place, screw nut, testing leakage. Don’t use gas hob if there is any gas
leakage.
6. For some models, the auxiliary pan is only workable for pan with
φ100
mm
specification
.
7.The
gas
hob
with
LPG
must
use
eligible
reducing
pressure
valve.
2
M
150mm
150mm
1
0
0
0
m
m
picture2
picture3
picture4
Use
Instruction
1.Check
if
the
burner
,
copper
cap
,
copper
core or other parts are positioned
correctly, and confirm the knob button (Picture 2) position, then turn on the gas
valve.
2.Ignition
:
Press
the
control
button
then
contrarotate
90
degree
accordingly
,
it
'
s
big
fire
. (
Picture 3
),
And the impulse sound will be heard, keep pressing
down the button 2-3 seconds, then loosen it. If fail to ignition, try it again.
Contrarotate more 90 degree, it’s small fire. (Picture 4).
Note
:
If
it
'
s
the
first
to
use
gas
hob
or
gas
hob
is
not
used
for
long
time
,
ignition
maybe
fail
at
the
first
time
,
please
try
it
repeatly
because
there
is
some
air
in
the
rubber
tube
.
Picture 1
Gas Hob
Gas Hob
150mm
3.Extinguish: the burner will be extinguished when the knob turn to the position.
(Picture 2)
4.Adjust firepower: rotate knob according to accordant firepower instruction, then
you can get corresponding firepower.
5.Adjust air: in order to burn sufficiently, users can adjust air by inlet. Adjust air
door ( at the bottom of gas hob) clockwise or counterclockwise until the flame is
clear and blue. (like following picture).Please judge flame as following:
●
Combustion
well
:
the
flame
is
cyanine
without yellow flame or red fire,
meanwhile, the interior and exterior flame is clear.
●
Air
deficiency
:
the
flame
is
stretched
,
the
interior and exterior flame is
faintly, meanwhile, flame color is yellow or red.
●
Air superabundance: the flame is left cap or shorter obviously, and the color is
cyan.
